Copper Clench Nails

As part of our partnership with Strawbery Banke Museum, we produce cut copper clench nails for boat builders and other crafts people and hobbyists on three clench nail making machines purchased from the now closed Atlas Tack Company in Massachusetts.

Copper Clench Nail Features
  • Large thick heads that strongly resist pulling through the plank, even under severe strain, and are not easily weakened when finish-sanding flush or when refinishing later.
  • Shank is a robust cylinder at the head end and a square cut taper from the midpoint to the tip.
  • Taper ensures that the tip bends more easily than the shank, curling over to clench with little tendency to cripple the shank even in soft planking.
  • Tapering tip is square-sectioned so that it bends more easily in one plane and lies flat to the surface when clenched.
  • Square section resists working and loosening under severe strain.
  • Copper nails are in half-hard state so that clenching further work-hardens them to their optimum strength and toughness to resist straightening under stress.

Clench Nail Stock Sizing & Prices
Contact us to place your order today!
 All Clench nails are $56 per pound* plus shipping and handling.

Please note: When ordering nails for clenching, nail length should be 1/4" longer than the thickness of the material being fastened.

*Prices subject to change
Nail Stock Size
1/16



3/32




1/8

 
Nail Length
3/4"
7/8"
1"
1 1/8"

7/8"
1"
1 1/8"
1 1/4"

1"
1 1/8"
1 1/4"
1 3/8"
Approximate # per lb.
500
450
375
350

320
300
300
280

205
180
175
170